Tales of Eternia Remastered Specs: PC Requirements, Frame Rates, and Platform Targets

The Tales of Eternia Remastered specs are modest, and that is good news. Bandai Namco and developer TOSE have brought the 2000-era PlayStation RPG to six platforms, and the published hardware list suggests you will not need a new machine to run it. This guide collects every confirmed Tales of Eternia Remastered specs detail in one place: PC minimum and recommended requirements, resolution and frame rate targets for PS5, PS4, Switch, Switch 2, Xbox Series X|S, and Steam, plus the storage and DirectX 12 caveats worth checking before you buy.

Tales of Eternia Remastered Specs at a Glance

Bandai Namco published per-platform resolution and frame rate targets ahead of launch, and they are consistent across the board: every version aims for up to 60 fps.

Table: resolution and frame rate targets reported by RPG Site on June 10, 2026, citing Bandai Namco's Japanese technical specifications. Bandai Namco treats these as targets rather than guarantees, and PC output depends on the display you connect.

Two things stand out. First, the Switch 2 version targets 4K alongside the PS5 and Xbox Series X builds, while the original Switch targets a 1080p/720p range. Second, no platform lists a 120 fps mode or a performance-versus-fidelity toggle, so expect a single 60 fps ceiling across the lineup rather than a menu of display options.

PC System Requirements for Tales of Eternia Remastered

The Steam store listing splits its requirements into Minimum and Recommended tiers. As of the Steam page captured on October 16, 2026 at 06:09 UTC, both tiers name the same processor, memory, and graphics hardware.

Table: PC system requirements from the Tales of Eternia Remastered Steam store page, captured October 16, 2026, 06:09 UTC.

Why the two tiers look identical

The only functional difference between Minimum and Recommended is the graphics preset that each tier is estimated to sustain: "Low" versus "High," both at 1080p and 60 fps. The CPU, RAM, and GPU lists do not change. That pattern is typical of a 2D remaster with a fixed rendering ceiling rather than a scalable 3D engine, and it means an entry-level gaming PC should clear the recommended bar without upgrades.

Both tiers carry the same warning: the frame rate may dip during graphics-intensive scenes. Treat the 60 fps figure as a target rather than a locked frame rate.

The DirectX 12 wrinkle

There is one inconsistency worth flagging. Both the Minimum and Recommended tiers list Windows 11 as the operating system, yet the Recommended notes also state that Windows 10 (Version 1809 or later) and a 4 GB VRAM graphics card are required for the DirectX 12 API. If you are running a DirectX 12-capable GPU with less than 4 GB of VRAM — the GTX 650 Ti at 1 GB, for example — that note is the line to read carefully before purchase.

Storage, Launcher, and Platform Notes

The listed 8 GB of available space is small by modern standards, and it applies to the PC build specifically. Console install sizes are not stated in the sources reviewed here, so check your platform's store listing for an exact figure.

A few other confirmed details for PC players:

• Single-player only. The Steam feature list includes Single-player, Steam Achievements, Steam Cloud, and Family Sharing — no multiplayer or co-op.
• Third-party EULA. The Steam page notes that playing requires agreement to a separate Tales of Eternia Remastered EULA.
• Language support. Interface and subtitles are available in English, Japanese, French, Italian, German, Spanish (Spain), Russian, Simplified Chinese, Traditional Chinese, and Korean. Full audio is limited to English and Japanese.
• Genre tags. Steam categorizes the game as Action and RPG, with user tags including JRPG, Action RPG, 2D, Fantasy, Retro, Magic, Story Rich, and Anime.

Remaster Features That Shape the Experience

Hardware specs only tell part of the story. Bandai Namco's official breakdown of what is new confirms a set of quality-of-life additions layered over the original game:

• Destination icons that point toward your next objective, cutting down on aimless wandering.
• An encounter toggle that lets you switch random battles off to follow the story, then back on when you want to level up.
• High-speed mode during auto-battles for routine fights.
• Boost, Battle Retry, and Quick Recovery options that soften difficult encounters without removing them.
• Extreme difficulty, available from the start, and Unknown difficulty, unlocked after completing the game.
• A Remastered / Original toggle for graphics and sound effects, so you can switch between modern visuals and the 2000 presentation mid-playthrough.
• English and Japanese voice acting, selectable.

Combat still runs on the Aggressive Linear Motion Battle System (A-LMBS), the real-time 2D system built around Arte chains and party positioning. Nothing in the published specs suggests the battle system was reworked — this is a presentation and convenience remaster, not a remake.

Release Date, Editions, and Price Snapshot

This is where the sourced material diverges, so here is exactly what each outlet states.

The Steam store listing captured on October 16, 2026 at 06:09 UTC shows a release date of October 15, 2026. Bandai Namco's European news post and RPG Site both state October 16, 2026. Bandai Namco's published unlock schedule puts PS4, PS5, Xbox Series X|S, Switch, and Switch 2 at 0:00 local time on October 16, and PC at 0:00 CEST on October 16. Because local time zones differ, confirm the date shown on your regional store page before preloading.

Prices are equally snapshot-dependent. As observed on the Steam listing on October 16, 2026:

The Deluxe Edition bundles the base game, a Super Growth Support Item Set, a Battle BGM Pack featuring standard battle themes from earlier Tales games, and a Digital Artbook & Soundtrack. The Steam page separately lists small "Lv. Up" boost DLC items at $1.99 and $2.99 each. Prices and promotions change, so verify the current figure on the store page rather than relying on this snapshot.

On the PlayStation side, buying through the PlayStation Store grants both the PS4 and PS5 versions. On Nintendo hardware, the Japanese eShop listing confirms there is no upgrade path from Switch 1 to Switch 2, and save data is not compatible between those two versions — a meaningful caveat if you plan to migrate consoles later.

For community sentiment, the Steam page captured on October 16, 2026 at 06:09 UTC showed an overall "Positive" rating based on 87% of 41 user reviews. That is a very small sample at launch and should not be read as a settled verdict; player experience will shift as more reviews arrive.

Frequently Asked Questions

What are the minimum Tales of Eternia Remastered specs for PC? According to the Steam listing captured October 16, 2026, you need a 64-bit Windows 11 system, an Intel Core i3-8100 or AMD Ryzen 3 3100, 4 GB of RAM, DirectX 12, and 8 GB of free storage. Graphics options are a GeForce GTX 650 Ti (1 GB), a Radeon HD 7770 (2 GB), or an Intel Arc A310 (4 GB), with an estimated 1080p/60 fps at Low settings.

Does the remaster hit 60 fps on Nintendo Switch? Bandai Namco's published targets list up to 60 fps for both Switch and Switch 2, with resolution ranging from 720p to 1080p on the original Switch and up to 4K on Switch 2. These are targets reported on June 10, 2026, not confirmed final performance.

How much storage does the game require? The Steam listing specifies 8 GB of available space. Console install sizes were not included in the sources reviewed, so check your platform's store page for those figures.

Can I upgrade my Switch 1 copy to Switch 2? No. The Japanese eShop listing confirms there is no Switch 1 to Switch 2 upgrade path, and save data is not transferable between the two versions.